|
|
|
|
|
|
|
|
|
|
Sanitary Tube Welding
|
| Magnatech Model 514 Digital Controller/Power Supply |
Magnatech 514 Quick Features:
- 200 amp output
- 100% digital, no calibration
- Auto-Line - 100v to 250v single phase input
- Auto Programming
- 100 program memory
for complete 514 product information
|
|
|
| Magnatech Model 904 Water Cooler |
| The recirculator provides water cooling of the torch and/or weld Head body. It is mounted beneath the power source with cam-lock attachments. An integral flow switch prevents lack of coolant damage. It is powered by an interconnect cable to the Model 514 power supply. |
Heat Removal Capability: Approximately 5,000/BTU/Hr
Coolant Capacity: 5.7 Liters (1.5 gallons)
Input Power: Powered by Magnatech Model 514
Features: Integral flow switch, quick disconnect fittings, tank level gauge, replaceable cartridge filter/strainer
Use With: Magnatech Model 514 |
|
|
|
|
|
|
|
|
|
|
|
|
| Magnatech Models 819A, 821A, 822A and 823A C- Series Weld Heads |
Magnatech C-series weld heads make autogenous tube welding easy. Four standard models cover sanitary tube sizes from .25" to 4" OD. With Magnatech's C-series heads, you can make any sanitary weld in less time with precise, repeatable results. The solid collet clamping design simplifies work piece fit-up and eliminates the need for pre-tack welding in most cases. Flush or extended collets are available for all sizes. The C-series weld heads can be used with Magnatech Models 514 and 515 power supply.
Process: GTAW
Weld Head Type: Autogenous, enclosed arc
Tube Size Range:
- C-10 (819A): .25" -1.0" OD
- C-25 (821A): .5" - 2.5" OD
- C-35 (822A): .75" - 3.5" OD
- C-45 (823A): 1.0" - 4.5" OD
Features:
- Head-mounted controls eliminate remote pendant
- Flush and extended collets available in ANY size
- 25’ standard control cable
- Home feature automatically returns the rotor to its start position at weld completion
- C-series head includes waterproof storage case
- Narrow weld head profile allows welding with limited axial clearance
- Lightweight detachable cartridge simplifies cooling and cleaning
- Weld heads may be used with or without water cooling
- Viewport allows fit-up inspection before weld initiation
Options:
- Water-cooled cartridges available
- 25’ and 50’ control cable extensions available
- Precision pre-ground tungsten electrodes available from TTS
- Bench Mount Holder firmly retains weld head.
- Offset tungsten holder
|
 
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Technical Tool Solutions, Inc. 766 Oakwood Ave, Lake Forest, IL 60045
ph: (847) 235-5551 Fax : (847) 574-2506 email 
|
|
|
|
© 2007 Technical Tool Solutions, Inc. All Rights Reserved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
